SYLGARD537175ML | DOW SYLGARD 537 ONE PART DIELECTRIC GEL - 175ML | Aircraft products | na

Home / NA / SYLGARD-537-175ML

Part Number: SYLGARD-537-175ML

DOW SYLGARD 537 ONE PART DIELECTRIC GEL - 175ML

Size: 175ML

Unit of Measure: EA

Minimum Order Qty: 1

Manufacturer: Dow

Usually Ships: REQUEST

Features and Specifications

SYLGARD 537 One Part Dielectric Gel – One part, clear dielectric gel for sealing and protecting electronic devices.

SYLGARD 537 One Part Dielectric Gel is a single component, clear gel designed for use in sealing and protecting electronic components, particularly those of a sensitive nature. Upon curing, it transforms into a cushioning, self healing, and resilient material that effectively mitigates stress while maintaining dimensional stability. This makes it ideal for applications requiring both the flexibility of a liquid and the structural integrity of an elastomer. Its primary functions include moisture and contaminant isolation, high voltage electrical insulation, and stress relief protection against thermal and mechanical stresses on circuits and interconnections.

The gel's low viscosity ensures easy application and good flow beneath components, simplifying the sealing process. No mixing is required prior to application. Curing is achieved through the application of heat, with specific cure times and conditions available in the product's typical properties table. Note that cure time refers to reaching 90% of final properties, and additional time may be necessary for component heating. It is recommended to verify cure schedules for each specific application. The gel has a viscosity of 375 mPa sec, a gel hardness of 290 grams, and a penetration of 20 (1/10 mm). The shelf life at 5°C is 9 months.

Key Features:
• One part formulation – no mixing required
• Low viscosity for easy application and good flow
• Cures with heat to form a cushioning, self healing material
• Provides excellent moisture and contaminant isolation
• Offers high voltage electrical insulation
• Protects against thermal and mechanical stress

Typical Applications:
• Sealing and protecting electronic devices
• Protecting delicate electronic components
• Isolating circuits from moisture and contaminants
• Providing electrical insulation for high voltages
• Stress relief for circuits and interconnections Uses Potting various electronic devices One part gel with no mixing required
Low viscosity
Heat cure
Low viscosity allows good flow under components Use: Battery Pack, Boards and Assemblies, Components
Number of Parts: One Part No Mixing
Color: Clear
Cure Type: Heat Cure
Dielectric Strength: 560 volts per mil v/mil
Heat Cure: 60 min @ 120 °C
Opacity: Transparent
Penetration after cure: 20
Specific Gravity @ 25 °C: 0.98
Thermal Conductivity: 0.15 W/mK
Viscosity: 375 mPa.s

Color: CLEAR

Other aircraft parts starting with D

Other aircraft parts from Dow

Millions of Consumable Products for the Aerospace Industry

Part Number: SYLGARD-537-175ML

DOW SYLGARD 537 ONE PART DIELECTRIC GEL - 175ML

Features and Specifications

Other aircraft parts starting with D

Other aircraft parts from Dow

JACO Aerospace Products