Lamart C-18-PS
Lamart C-18-PS is designed for electromagnetic and radio frequency shielding on microwave components, cables, antennas, motors, or cabinets. It provides static drain and is solderable and conductive. It can be used as a connector where mechanical connectors are not practical and for circuit board repair. The interliner permits ease of die cutting.
The product consists of a 0.0007" copper foil backing, a 0.001" polyester film, and an acrylic, thermosetting adhesive with a 90 lb. release liner. It has an insulation class of 130 degrees C and requires a cure cycle of 1 hour at 150 degrees C.
Key Features:
- Electromagnetic and radio frequency shielding
- Static drain
- Solderable and conductive
- Ease of die cutting
Typical Applications:
- Microwave components
- Cables
- Antennas
- Motors
- Cabinets
- Connector applications
- Circuit board repair
Product Key Properties:
Backing: 0.0007" Copper Foil / 0.001" Polyester Film Adhesive: Acrylic, Thermosetting Release Liner: 90 lb. Insulation Class: 130 degrees C Cure Cycle: 1 hour at 150 degrees C Signal Attenuation: 105dB @ 100 MHz (ASTM D4935-99) Dielectric Strength: 5,000 volts (ASTM D149) Thickness: 0.0033 inch +/- 10% (PSTC-33) Peel Strength: >32 oz./inch of width (ASTM-D-1000) Tensile Strength: 17,000 psi (ASTM-D-882) Elongation at Break: >14% (ASTM-D-882) Color: Copper Shelf Life: 1 year when stored under conditions of 70 degrees F. (21 degrees C.) and 50% R.H.
Product Performance Benefits:
- Provides effective electromagnetic and radio frequency shielding
- Offers static drain capabilities
- Ensures solderability and conductivity
- Facilitates easy die cutting with the interliner