Chemlok 610 Adhesive
One-coat, water-based adhesive for bonding specialty elastomers to metals and textiles
Chemlok 610 adhesive is a single-component, water-based adhesive designed for bonding a wide variety of specialty elastomers, including nitrile, hydrogenated nitrile, fluoroelastomer, epichlorohydrin, polyacrylate, and ethylene acrylic, to metal and textile substrates. It also functions as a protective coating for metals, preventing corrosion. Its low viscosity allows for easy application using brush, dip, or spray methods. The adhesive air-dries within 60 minutes at room temperature before bonding, offering a convenient and efficient solution for various industrial applications.
Technical Specifications
- Color: Orange to Red Liquid
- Density: 1000 kg/m3, 8.34 lb/gal
- Percent Solids by Weight: 2.5 to 3.0
- Flash Point: > 93 C, > 200 F
- Solvent: Deionized Water
- pH Range: 10 to 14
Key Features and Benefits
- Easy to apply
- Water-based, environmentally preferred
- Reduced VOC emissions
- Bonds various elastomers to metals and textiles
- Protects metals against corrosion
Typical Applications
- Elastomer-to-metal bonding
- Elastomer-to-textile bonding
- Metal corrosion protection
Compatible Elastomers
- Nitrile (NBR)
- Hydrogenated Nitrile (HNBR)
- Fluoroelastomer (FKM)
- Epichlorohydrin (ECH)
- Polyacrylate (ACM)
- Ethylene Acrylic (AEM)
- EPDM Polymers - peroxide cure
Shelf Life/Storage
Shelf life is two years from date of shipment when stored by the recipient at 21-27 C (70-80 F) in original, unopened container. Do not freeze product.