Part Number: PGD-6
"Glow in the dark" tape
4.1
Paying Less Means Getting More. Better Pricing Available for Larger Purchases.
Unit of Measure:
Minimum Order Qty: 0
Manufacturer: Adhesive Tape Products
Usually Ships:
Features and Specifications
A flexible polyester laminated photoluminescent film coated with a permanent acrylic pressure-sensitive adhesive and backed with a 5 mil poly coated paper release liner. The photoluminescent pigments absorb and store energy from normal, ambient light. In sudden darkness, the tape is immediately visible. These tapes are a nonelectric safety system that easily and inexpensively affixes to walls, handrails, columns, around doorframes, and along stairways and baseboards. Tape will glow in total darkness after exposure to artificial or natural light - it is fully charged within 30 minutes.
Adhesion to Steel:
Adhesion to SST: 72 oz/inch - 24 hour dwell; Shear Adhesion to SST (1/2” x 1/2”, 500 gram) > 24 hours
Adhesive:
Solvent based Acrylic
Features:
Glows brightest the first 30 minutes after activation has ceased, but will remain clearly visible in a totally dark room to the night-adapted eye for 6+ hrs for the PGD-6, 10+ hours for the PGD-10 and 24+ hours for the PGD-24. These tapes are screen printable. They can also be die-cut and kiss cut using steel rule dies. 3” neutral paper cores.
RLS/CS:
18
Temperature Resistence:
Minimum application temperature: 50°F
Thickness:
Nominal Thickness (film/adhesive) 10 mil +/-10%; Release Liner Thickness 5 mil
Typical Applications:
Used for identification of critical equipment controls, light switch covers, exit and directional signage – especially for escape routes and stairways. Tape clearly labels safety equipment and provides a safe, illuminated path through stairwells, halls, rooms, and other potentially hazardous areas. Simple and inexpensive to install position, peel off backing, and adhere, this safety system requires virtually no maintenance. Used in hotels, hospitals, schools, public facilities, office buildings
Width:
4" (100mm)