SOCOPAC 50S | CORROSION INHIBITOR | Aircraft products | long-term-temporary-penetrating-hydrophobic-corrosion-inhibiting-compound

Home / Long-Term-Temporary-Penetrating-Hydrophobic-Corrosion-Inhibiting-Compound / SOCOPAC 50S

Part Number: SOCOPAC 50S

CORROSION INHIBITOR

Size: 500 ML

Unit of Measure: EA

Minimum Order Qty: 12

Manufacturer: Socomore

Usually Ships: Request

Features and Specifications

SOCOPAC 50S provides a complete protection of materials, spare parts and assemblies in the most unfavourable climatic conditions. The film obtained forms a very efficient barrier against all the agents responsible for corrosion (water, oxygen, acids, basis and salts from industrial emissions, tropical atmospheres, etc...).Its long-lasting corrosion preventive power allows a complete conservation guarantee after application on various materials such as aluminium and alloys, steels, light metals (titanium, magnesium), zinc and galvanized steel, copper and its alloys, cadmium. It can be applied without any risk of attack on painted surfaces, composite materials, plastics, rubbers, Plexiglas and polycarbonates (non crazing). SOCOPAC 50S has been formulated to offer the highest safety to the users as well as to the pieces to be protected; it is absolutely free of harmful solvents, toluene, xylene or chlorinated compounds. After drying SOCOPAC 50S leaves an impervious durable protective film, resistant to temperature differentials, heavy rain, sea air, tropical atmospheres or corrosive industrial atmospheres. This film is medium hard, but wax-like and dry to the touch. Thanks to its flexibility, it can absorb slight impacts without damage or crazing. If the scratch is deeper, the capillary activity and polarity properties of the film towards the treated surface prevent the scratch from spreading. This facility of the protection called «self-healing» allows handling of the pieces even after a prolonged storage time, without loss of the protective value of the SOCOPAC 50S film. The dry film is intended to resist several years outside and above all to remain stable during this period. It does not suffer air-damage, by exposure to sun or to heat; it is not subjected to any cross linking or polymerisation and can be therefore removed several years after application as easily as the first day. Though it has a particularly pronounced hydrophobic quality, SOCOPAC 50S was not designed for the role of a specifically hydrophobic compound. However its capillary properties allow it to protect and repel water in an efficient way any material normally exposed to open air. In cases of humid, enclosed conditions, materials and parts exposed to wide differences in temperature, before protection it is necessary to apply a water-repellent compound such as WADIS 24, or SOCOPAC 25H where a total thickness greater than 50 microns is required, before the SOCOPAC 50S coating.

Other aircraft parts starting with C

Other aircraft parts from Socomore

Millions of Consumable Products for the Aerospace Industry

Part Number: SOCOPAC 50S

CORROSION INHIBITOR

Features and Specifications

Other aircraft parts starting with C

Other aircraft parts from Socomore

JACO Aerospace Products