This material has been discontinued. Limited Stock Remaining.
Suggested Replacements:
EA-9658-065-NWG
EA-9658-100-NWG
EA-9658-060-UNS
FM 1000 is a modified polyamide-epoxy unsupported adhesive film and is specially developed for bonding metals, structural plastic laminates, and various composite structural plastic sandwiches.
FM® 1000 film adhesive is serviceable over a temperature range of -423°F to 200°F (-250°C to 95°C).
Primers are not generally required for use with FM® 1000 adhesives to increase strength; however, two primers are available for use where processing requires “tacking” of the FM ® 1000 film in place or for protection of clean details.
BR® 1009-8 tack primer is used for room temperature tacking while BR® 1009-49 tack primer is used for “heat-tacking” at 175°F (80°C) FM® 1000 film adhesive, with and without primer, has been tested extensively against the requirements of Federal Specification MMM-A-132.
FM® 1000 has a typical cure cycle of 60 minutes at 340° +/- 10°F (170°C +/- 6°C) at 40 psi (0.28 MPa).
Typical applications for FM® 1000 include metal-to-metal bonding, composite-to-composite bonding, and composite structural plastic sandwich bonding.
Features and Benefits
- Exceptional lap shear and peel strength
- Wide service temperature range; -423°F to 200°F (-250°C to 95°C)
- Designed for use in metal-to-metal and honeycomb sandwich structures
- Qualified to MMM-A-132, Type 1, Class 1