|

Table 1: Dimensions
Notes: 1. Dimension W (wall thickness): 0.65 (0.025 in.) nominal. 2. Dimension R (length of sheet) shrinks approximately 10%.
Material: QSW sleeves shall be fabricated from irradiated modified polyefin compounded to produce homogeneous, uniform product whose exterior surface is essentially free from flaws, defects, pinholes, seams, cracks or inclusions, and the color shall be black. The interior shall be coated with a hot melt thermoplastic adhesive.
Acceptance Tests: - Dimensional (1 piece per lot): Shall meet the specified dimensions.
- Visual 20 pieces per lot: Both backing and adhesive surfaces shall be essentially free from flaws, defects, pinholes, seams or cracks, and must have clean cut edges.
- Application (1 piece per lot): 15 minutes @ 175 ± 2ºC), No slippage, bubbles or flaws.
installation instructions >>
|